ngHobbies
OKTO XL COMBI ASSEMBLED DISTRIBUTION BOARD
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards! Extremely fast brushless controllers version ...ngHobbies
DOUBLE QUADRO 2XL - COMBI
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards! Extremely fast brushless controllers version ...ngHobbies
DOUBLE QUADRO V3 - COOL
| • voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A (per BL-Unit) and 120A (all together) with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • weight | ca. 109g |
IMPORTANT:, Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !, : The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter set-points are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of set-points can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., Power:, Mechanical data:, , • Dimensions (W x H ):, In the package:, • 2 SMD preassembled, programmed and tested boards already mounted and soldered, Links:,
8 ESCs on two boards with extra cooling through assembled ...ngHobbies
SINGLE BL-CTRL V3.0 2XL
| IMPORTANT | Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! |
| •voltage | 10 to 30V -> 3 -7S Lipo |
| • current | up to 60A with appropriate cooling |
| • Silent Start | test tone at startup can be disabled |
| • hole | 3mm |
| • Dimensions (W x H ) | approx 75mm x 26mm (without capacitors) |
| • Dimensions (W x H ) | approx 96mm x 26mm ( with capacitors) |
| • weight | 15g (with capacitors) |
Note: The BL-Ctrl 3.0 controller is specifically designed and optimized for our motors. For maximum stability of the MikroKopter setpoints are set almost instantaneously on the motor. If other motors (especially larger power classes) are used with this controller, this fast change of setpoints can easily lead to very high peak currents, which bring the BL-Ctrl control to the limit or an overload. This is no fault of BL-Ctrl3.0 controller, but a systemic property., This new version has the following features:, Dimensions:, The following items are included in this kit:,
Extremely fast brushless controller version V3 for any MikroKopter with ...ngHobbies
HIGH G GFORCE MICROSENSOR
Documentation:, Click here to download the manual,
Need to know how many G's you pulled in that ...ngHobbies
MPI 70-100A WATT METER
| • Dimensions | 4.0 x 2.2 x 0.9 in, Weight |
Features:, • 70A continuous, 100A max,, Documentation:, Included in the package,
MPI's 70A watt meter should be part of any field ...ngHobbies
FUNJET ULTRA ARF ELECTRIC RC AIRPLANE
,
Just when you thought your Multiplex FunJet was one of ...ngHobbies
4 CHANNEL FATSHARK SPYHAWK RTF FPV PLANE
| Wingspan | 840mm. |
| Flying weight | 185g |
| Length | 620mm. |
| Wing Loading | 28gr./dm square. |
| Expertise required | beginner |
This is package contains the following items:, Built in 25mW 5.8Ghz transmitter with a circular polarized 3 lobe cloverleaf antenna pre-installed, Setup and installation:, Setup manual and glue incloded,
Fatshark bring us this the new 840mm wingspan, ready to ...ngHobbies
4 CHANNEL FATSHARK SPYHAWK RTF FPV PLANE WITH GOGGLES
| Wingspan | 840mm. |
| Flying weight | 185g |
| Length | 620mm. |
| Wing Loading | 28gr./dm square. |
| Expertise required | beginner |
This is package contains the following items:, Built in 25mW 5.8Ghz transmitter with a circular polarized 3 lobe cloverleaf antenna pre-installed, Setup and installation:, Setup manual and glue incloded,
Fatshark bring us this the new 840mm wingspan, ready to ...ngHobbies
HITECH HS-50 SUPER FEATHER SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, None, Speed:, 0.09 @ 60 deg., Torque:, 8.33 / NA oz.in (4.8v only), Size:, 0.82" x 0.44" x 0.86", Weight:, 0.22oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The name says it all! The HS-50, Super Feather Servo ...ngHobbies
HITECH HS-65HB HIGH TORQUE ULTRA MICRO SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.14 / 0.11 sec @ 60 deg., Torque:, 24.99 / 30.55 oz.in (4.8v/6v), Size:, 0.92" x 0.45" x 0.94", Weight:, 0.39oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
Considered one of the most powerful servos in the micro ...ngHobbies
GOPRO CAMERA MOUNT FOR MK HEXA/OKTO
This GoPro Hero camera mount comes installed underneath, in the center of gravity of the Mikrokpter. It is also possible to install further to the front, so the wide angle of the GoPro will catch only minimal parts from the landing gear or the front outrigger. Installing it in such position we have achieved two important goals:, All motors work equally since nothing is off balance, Features:, Low cost, minimal parts. Pieces are CNC cut from 1.7mm G10/FR4, Package contains:, All necessary plates, screws, nuts and washers, Note:, Assembly required., Cables:, Do not forget to pick up a GoPro FPV cable from here:, GoPro Camera Cables, Demo Videos:, Outdoor testing - click here, Note:, This kit comes with a mounting plate which either replaces of can be sandwitched under the battery holding plate on Hexa and Optokopters. Additional mountig plates for Quads will be available soon., Assembly documentation:, Click here to open or download (2Mb),
New Generation Hobbies is proud to present this low cost ...ngHobbies
GPS EXTERNAL ANTENNA
The Expander will pick between the strongest of the two signals (from the built-in antenna or this External Antenna) which can improve reception if your model is upside down, etc. Includes cable with MMCX jack. NOTE: if you have our older GPS module (not GPS-5HZ) please check to make sure it has the gold MMCX connector protruding from the red heatshrink., Manual:, eLogger Manual,
External Active Antenna for GPS Expander Module. This tiny external ...ngHobbies
NGH EV-622A
| There are different charging modes for all requirements | Charging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc. |
Features:, Input Voltage range:, 11V-18V, Charging current range:, 0.1A - 10A, Charge power limit:, Max. 200W, Discharge power limit:, 25W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-18cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-6 cell, Pb battery voltage:, 2-24V, Weight:, 510g, Dimensions:, 145x98x30mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor,
The EV-622A is a low cost high preformance Li-Po, Li-Ion, ...